The goal of this tutorial is to initiate you to the Spinalcom viewer.

To follow this tutorial  install the viewer you first need to install the Spinalcom Drive. If you don't know how you can learn here.

Once this is done you can install the viewer in the folder you installed the drive.

$ npm install https://github.com/spinalcom/spinal-browser-viewer

To use the viewer you're going to need a an Autodesk Forge account. Create or log in:

https://developer.autodesk.com/

Create an App with at least the Data Management API and Model Derivative API. The other labels don't matter.

https://forge.autodesk.com/myapps/create

{
  "spinal-core-hub": {
    "env": {
      "SPINALHUB_PORT": 7777,
      "SPINALHUB_IP": "127.0.0.1"
    },
    "env_test": {
      "SPINALHUB_PORT": 7777,
      "SPINALHUB_IP": "127.0.0.1"
    },
    "env_production": {
      "SPINALHUB_PORT": 7777,
      "SPINALHUB_IP": "127.0.0.1"
    }
  },
  "spinal-organ-forge": {
    "env": {
      "INTERVAL": 2000,
      "CLIENT_ID": "REPLACE HERE",
      "CLIENT_SECRET": "REPLACE HERE",
      "SPINAL_USER_ID": "168",
      "SPINAL_PASSWORD": "JHGgcz45JKilmzknzelf65ddDadggftIO98P"
    },
    "env_test": {
      "INTERVAL": 2000,
      "CLIENT_ID": "REPLACE HERE",
      "CLIENT_SECRET": "REPLACE HERE",
      "SPINAL_USER_ID": "168",
      "SPINAL_PASSWORD": "JHGgcz45JKilmzknzelf65ddDadggftIO98P"
    },
    "env_production": {
      "INTERVAL": 2000,
      "CLIENT_ID": "REPLACE HERE",
      "CLIENT_SECRET": "REPLACE HERE",
      "SPINAL_USER_ID": "168",
      "SPINAL_PASSWORD": "JHGgcz45JKilmzknzelf65ddDadggftIO98P"
    }
  }
}

If you see a previously launched spinal-hub-7777 or spinal-hub-forge-7777 you need to delete them.

$ pm2 delete spinal-hub-7777
$ pm2 delete spinal-organ-forge-7777

You can now restart your application with:

$ pm2 restart launch.config.js

The drive, the admin and the viewer is a are browser applicationapplications. To use it them you need to access it them via a browser (you may change the host/port corresponding to your .config.json file):

http://127.0.0.1:7777/html/drive

To create your digital twin you're going to need a rvt file. You can get one here:

http://www.autodesk.com/revit-rac-basic-sample-project-2016-enu?_ga=2.104361024.1367483780.1526027060-750616995.1518426196

Once you have downloaded it, use your file manager to drag and drop it on the drive.

Then right click on it the .rvt and select the application "Create Digital Twin".

This will take a few minutes. Once this is done right click on the digital twin that was created and select Open with Op. Center Viewer.

You It will be sent to a new page where you will see a 3D open a new tab with the viewer and load the 3D model of a house.